GuardMaster Protective's

GuardMaster Protective's 

GuardMaster products provide a rational range of corrosion Protective's and moisture displacing films for the protection of ferrous and non-ferrous metals and machined components, plant and capital equipment. 

GuardMaster products are all solvent deposited, supplied in the liquid form and available in bulk, 205 and 25 litre containers. 

GuardMaster WD a solvent water displacing liquid and light protective, suited for inter-shop protection after machining operations leaves a dry finish 

GuardMaster DK  as above but with an oily finish 

GuardMaster 10 a solvent deposited water displacing film which is oily for those less strenuous conditions where a thin film is sufficient. 

GuardMaster 20 as above, but a thicker deposited film which is firm and is not susceptible to finger print corrosion. 

GuardMaster 30 leaves a greasy film with good protective properties, see data below for film thickness. 

GuardMaster 40 leaves a firm wax film offering protection for long term storage and is resistant to salt water spray. 

Other metal protective formulations can be provided, please contact our office for information.

 

TYPICAL PERFORMANCE DATA

Grade    Drying time       Film Thickness       Film Type          Protection indoor        Protection  Outside

 

10          2 hours                1.1 microns         Oily                          4 months                          1 month

20          2 hours                1.5 microns         Waxy                       6 months                          2 months

30          3 hours                18.5 microns       Greasy                   12 months                         9 months

40          4 hours                25 microns          Firm Wax               3 years                             1 year

DK         40 min                 n/a                        Oily                         3 months                           N/A

WD        40 min                 n/a                        Dry                          3 months                           N/A

 

The Protection & Drying periods are given as a guide only since each application will have varying requirements & conditions.

For best results metals should be dry, bright and free of rust before application of GuardMaster.

Contact Us

Contact Us

Drivers Wharf, Northam, Southampton SO14 0PF

PHONE

023 8033 7800

Email

sales@cplubricants.co.uk

FOR ANY HELP AND QUERIES

Please enter your name.
Please enter a valid email.
Please enter a message.

Sat Nav Coordinates : 50.91313 -1.38559

CP Lubricants Ltd, Drivers Wharf, Northam, Southampton SO14 0PF | Tel: 023 8033 7800 | Email: sales@cplubricants.co.uk

Cp Lubricants