GuardMaster products provide a rational range of corrosion Protective's and moisture displacing films for the protection of ferrous and non-ferrous metals and machined components, plant and capital equipment.
GuardMaster products are all solvent deposited, supplied in the liquid form and available in bulk, 205 and 25 litre containers.
GuardMaster WD a solvent water displacing liquid and light protective, suited for inter-shop protection after machining operations leaves a dry finish
GuardMaster DK as above but with an oily finish
GuardMaster 10 a solvent deposited water displacing film which is oily for those less strenuous conditions where a thin film is sufficient.
GuardMaster 20 as above, but a thicker deposited film which is firm and is not susceptible to finger print corrosion.
GuardMaster 30 leaves a greasy film with good protective properties, see data below for film thickness.
GuardMaster 40 leaves a firm wax film offering protection for long term storage and is resistant to salt water spray.
Other metal protective formulations can be provided, please contact our office for information.
TYPICAL PERFORMANCE DATA
Grade Drying time Film Thickness Film Type Protection indoor Protection Outside
10 2 hours 1.1 microns Oily 4 months 1 month
20 2 hours 1.5 microns Waxy 6 months 2 months
30 3 hours 18.5 microns Greasy 12 months 9 months
40 4 hours 25 microns Firm Wax 3 years 1 year
DK 40 min n/a Oily 3 months N/A
WD 40 min n/a Dry 3 months N/A
The Protection & Drying periods are given as a guide only since each application will have varying requirements & conditions.
For best results metals should be dry, bright and free of rust before application of GuardMaster.
Drivers Wharf, Northam, Southampton SO14 0PF
023 8033 7800